• THE SHARED STORAGE SOLUTION FOR MULTIMEDIA -REPLACEMENT
  • PRO-CAHCHE A
Telairity
Scalable Encoding System PDF Print E-mail

 

SES3200 Scalable Encoding System

The Telairity SES3200 is a complete “head-end in a box” solution for customers seeking to maximize encoding density for SD, mobile and PC video while minimizing cost. HD video also can be included if desired. A completely modular design built around the industry-standard ATCA chassis allows for easy scaling of capacity, adding SD encode channels in groups of four. A 12RU 14-slot chassis can accommodate 4 8-input boards, 8 4-channel encoder boards, and 2 multiplexed output boards, providing a total of 32 channels with either full dual redundant output or simultaneous dual output over separate network types (e.g., ASI and IP). A full fabric backplane eliminates the need for external cables, routers, switches, and multiplexers, while providing the ability to route any input to any output under dynamic software control.

 

 

 

Applications

The Telairity SES3200 Encoding Platform offers state-of-the-art video compression in dense 5U and 12U ATCA chassis form factors. This "head-end in a box" solution is ideal for customers seeking the most cost- effective and reliable way to implement large deployments for:

  • IPTV, OTT
  • WebTV
  • Broadcast Distribution to Mobile / Satellite / Cable / Terrestrial
  • Supports all digital broadcast standards, including ATSC, DVB-S/S2/SH, DVB-C, DVB- T/T2, DVB-H, CMMB, ISDB-T, DMB-T/H

Benefits

Dense ATCA Chassis system in 12RU and 5RU form factors

Based on the fully programmable Telairity-1 video architecture; easy software upgrades to improve quality, lower bit rates, add new options and convert between codecs

Leading-edge Telairity Mobile Video technology for best video quality at the very low bit rates required for mobile broadcasts

MPEG-4 AAC LC and HE options for high audio quality at very low compressed bit rates; Dolby Digital / AC-3 and Dolby E pass-through also supported

Flexible redundancy schemes from full dual to 31+1

"Instant on" startup and restart times

Wide variety of options for input, encoding, transcoding, and output

 

 

 

Video Encoding Features

  • High, Baseline & Main Profiles, H.264/AVC: 1, 1b, 1.1, 1.2, 1.3, 2; AVS: 2.0
    • Supports older 2G and new 3GPP, 3GPP2 networks; 3GPP multirate file format
  • Input Video Formats: 576i (PAL), 480i (NTSC) SD or 1080i, 720p HD
  • Transcoding, Transrating, Down-sampling, Anamorphic scaling, Deinterlacing
  • Output Resolutions:
    • HD – 1080i x 1920 / 1440 / 1280 and 720p x 1280 / 960
    • PAL — 720x576i/p (full SD) to 176x144p (QCIF)
    • NTSC — 720x480i/p (full SD) to 320x240p (QVGA)
    • Other mobile resolutions including CIF, HVGA, HQVGA, QQVGA, SQCIF, etc.
  • Rate Control: Constant Bit Rate (CBR) @ 128-2000 Kbps
  • Scene change detection with fixed, open, closed, adaptive GOP structures • Spatial preprocessing • Deblocking (Loop) filter • CAVLC entropy coding • All intra- and inter-prediction modes • Qpel • Multiple reference frame prediction • TMC® Chroma • Luma/Gamma correction with De-ringing & Flicker removal

Audio Encoding Features (per channel)

  • Embedded or External audio input ; AC-3 pass-through
    • Four programs (stereo pairs): Stereo, Dual Mono, Mono
  • Bit Rates: 12 to 128 Kbps; Sample Rates: 32, 44.1, 48 KHz
    • Audio Codecs: MPEG-1 Layer 2; MPEG-4 AAC-LC or -HEv2

Control Features

  • Telairity EMS and Configuration Software
  • Industry Standard MIB supports interface with 3rd party SMS/NMS

Output

  • Multiplexed MPEG-2 transport stream over DVB-ASI
  • SPTS IP stream over Gigabit Ethernet
    • Pro-MPEG FEC (Forward Error Correction) with RTP transport protocol
  • Other available output options including TCP, HTTP

Video Inputs

Input Format:
SDI, ASI, or IP input • Composite input option
Video Input Formats:
4:2:2 for PAL and NTSC SD, 720p or 1080i HD
Frame Rates:
(*720p only)
Frames per second: progressive mode 23.98, 24, 25, 29.97, 30, 50*, 59.94*, 60*
Fields per second: interlaced mode: 50, 59.94, 60
Digital Video In:
Up to 32 BNCs for 75Ω cable (SDI, ASI, composite)
Up to 32 RJ-45s for Cat5/6 Ethernet cable (IP)

Audio Input

Input Format:
Embedded per SMPTE 272M (SD-SDI); 299M (HD-SDI)
Dolby Digital / AC-3 and Dolby-E pass-through

Compressed A/V Output

Output Interface:
One Digital Video Broadcast — Asynchronous Serial Interface (DVB-ASI), 270Mbps, buffered non-inverting with MPTS of up to 32 channels
One GigE Ethernet Interface with SPTS of up to 32 channels
• 2nd set of Interfaces available on optional output card
All channels fed to each output board. Optional 2nd output card provides dual redundant ASI and IP outputs for the same network (primary and backup) or separate networks. Separate networks may be of the same or different types (e.g., broadband and broadcast)
Packet Format:
MPEG-2 188-byte Transport Stream packets in formats:
TS/UDP/IP, TS/RTP/UDP/IP with optional FEC, RTCP
Compression Format:
Baseline & Main Profiles H.264: 1 - 1.3; AVS 2.0
Compressed Bitrates:
User programmable: 128 Kbps to 2 Mbps, CBR

Network Management


Telairity EMS or standard SNMP for NMS/SMS

Power Specifications

Input voltage:
-48VDC; or 100 to 242 VAC (auto-sensing) with 1RU AC/DC conversion unit
Line frequency:
47 to 63 Hz
Power consumption:
about 60W per channel

Mechanical Specifications

Dimensions & Weight:
12RU (H) x 19" (W) x 14" (D) rack-mountable Fully loaded with 14 boards, about 100 lbs
5RU (H) x 19" (W) x 14" (D) rack-mountable Fully loaded with 5 boards, about 30 lbs

Environmental Specifications

Cooling:
Forced air, inlets at front, outlets at back. Temperature-controlled fan speed
Temperature:
Operating: 10° to 55°C; Storage -20° to 60°C
Humidity & Pressure:
≤95% (non-condensing); 86kPa ~ 106kPa

Download Datasheet

 
IRD 5504-G Enhanced Multi-format Router PDF Print E-mail

BE-IRD 5504-G Enhanced Multi-format Router

 

The BE 5504-G is a universal (internationally ready) source-quality modular video I/O and decoder system, capable of handling all MPEG-2 and MPEG-4 (H.264/AVC), HD and SD, SPTS and MPTS input formats, with either 4:2:2 or 4:2:0 chroma sampling. Interfaces are available for DS3/G.703, QPSK, QAM, SDI, ASI, and Ethernet, as well as analog composite and component. Audio inputs may be embedded in an SDI stream, or input separately in digital AES/EBU or analog format. There are no limits on input bit-rate. By default, 1 video and 2 audio channels can be decoded, with an option to add a second video and 2 more audio channels. Transmission packet lengths of both 188 and 204 bytes are supported. DVB-S/S2, -T/T2 tuners available.

 

Video Input Formats

  • High Definition
    • MPEG-2 4:2:2, 4:2:0
    • MPEG-4 (H.264/AVC) 4:2:2, 4:2:0
    • 1080i: 25, 29.97, 30 fps
    • 720p: 50, 59.94, 60 fps
  • Standard Definition
    • MPEG-2 4:2:2, 4:2:0
    • MPEG-4 (H.264/AVC) 4:2:2, 4:2:0
    • 480i: 29.97 fps
    • 576i: 25 fps
  • Bit Rates
    • No limit

Audio Input Formats

  • MPEG-1 Layer 2
  • MPEG-2
  • Dolby Digital / AC-3
  • AAC-LC
  • AAC-HE & AAC-HE version 2

Input Transport Streams

  • Either SPTS or MPTS
  • EIA-608 closed captions decoded and output

Operation & Control

  • Front Panel Setup
  • Net Manager (included with product)
  • User-selected SNMP Manager

Configuration Modules

  • H.264 4:2:2 Decoder card (2 slots)
    • Video Outputs: SDI x 2 (2 BNC), Y/CVBS — Pb — Pr (3 BNC)
    • Audio Outputs: AES/EBU x 2 (2 BNC), 6-pin Phoenix (L/R analog balanced)
    • CVBS supports NTSC, PAL, PAL-M, PAL-N
  • Analog decoder card (1 slot)
    • Video/Audio Outputs: CVBS x 2 (2 BNC); 6-pin Phoenix x 2 (L/R analog balanced)
  • DS-3 (G.703) 2-way Adapter card (1 slot)
    • ASI: 1 In, 1 Out (2 BNC)
    • DS3 / G.703: 1 in, 2 Out (3 BNC)
  • Gigabit Ethernet card (1 slot)
    • Ethernet ports: 2 RJ-45 (1 management, 1 CA)
    • GigE ports: 1 RJ-45, 1 SFP (data)
    • Reset button
  • QPSK card (1 slot) or DVB- QPSK, 8PSK, 16APSK, 32APSK, and more
    • 2 or 4 RF Inputs, various loop outs available (depending on card)
  • QAM card (1 slot)
    • 1 RF Input, 1 RF-Test
  • Bit-rate Retrofit card (1 slot)
    • 3 ASI In, 1 ASI Loop-out (for ASI In1)
  • I/O card (slot 3 exclusively)
    • 2 ASI In, 2 ASI Out, 1 RJ-45 Ethernet In/Out

Physical Specifications

  • BNC connectors: 75 ohm
  • RF connectors: 75 ohm, 0-20 GHz frequency range
  • Power: AC 100V~240V, 50/60Hz, 65W (max)
  • Dimensions:1RU(H) /19(W)x23(L)in / 483(W)x584(L)mm
  • Weight: 17.4 lbs / 7.9 Kg

 

 
IRD-5503 Integrated Receiver/Decoder PDF Print E-mail

BE-IRD-5503 Integrated Receiver/Decoder

The BE-IRD-5503 is a versatile third generation 5500-class integrated receiver and decoder for broadcasters, cable operators, and telecoms with Genlock capability for accurate frame and color synchronization. A highly flexible professional choice, the 5503 can decode all video formats (HD or SD, MPEG-2 or MPEG-4), making it the perfect solution for customers migrating from MPEG-2 SD to MPEG-4 HD. A wide range of input/output options, together with a built-in Multiplexer/Filter, allows users to create highly customized transport streams. Two PCMCIA Common Interface card slots support a variety of Conditional Access systems, including Conax, Cryptoworks, Irdeto, Mediaguard, NDS, SECA, Viacross, and others. LAN control and monitoring can done using the unit's built-in Monitor Center facility, or through standard SNMP-based network management systems.

 

Tuner / Input Specifications (select one)

  • DVB-S/S2 QPSK & 8PSK Demodulation complies with DVB-S, MPEG-2, ETSI 300421 standards
    • Input frequency range: 950~2150MHz
    • Input Level: -25dBm~65dBm
    • Input Impedance: 75, F type female connector
    • Symbol Rate: 2~45Mb/s (SCPC or MCPC)
    • Rolling Off Factor: 0.35 for QPSK; 0.35, 0.25, 0.2 for DVB-S2
    • Punctured Rates:
      1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 8/10 for DVB-S QPSK
      3/5, 2/3, 3/4, 5/6, 8/9, 9/10 for DVB-S2 8PSK
    • LNB Level: 0, 13V, 18V adjustable
    • Reed Solomon Error Correction: 204, 188, T = 8 & I = 12
  • DVB-C QAM Demodulation complies with DVB-C & MPEG-2 standards
    Tuner
    • Input Symbol Rate Range: 1~7Mbps (PAL), 1~6Mbps (NTSC)
    • Demodulation: 16/32/64/128/256QAM
    • Bandwidth: 6, 7, 8MHz
    Input
    • Frequency Range: 48~860MHz
    • Digital Signal Input Level: -15~15dBmV
    • Input Impedance: 75, IEC Female (7/8MHz) or F Female (6MHz) Input
  • DVB-T/T2 COFDM Demodulation complies with DVB-T & MPEG-2 standards
    Tuner
    • Input Symbol Rate Range: 4.98~31.67Mbps (8MHz bandwidth)
    • Demodulation: QPSK, 16 QAM, 64 QAM
    • Bandwidth: 6, 7, 8MHz
    • FFT Mode: 2K/8K
    • Guard Interval: 1/4, 1/8, 1/16, 1/32, off
    • FEC Code Rate: 1/2, 2/3, 3/4, 5/6, 7/8
    Input
    • Frequency Range: 470-862MHz (UHF), 174-230MHz (VHF)
    • Digital Signal Input Level: -20~-70dBmV
    • Input Impedance: 75, IEC Female (7/8MHz) or F Female (6MHz) Input
  • DS3 Input & Loop-through Output compatible with Barco, Huawei, etc. protocols
    • Impedance: 75
    • Connector: BNC
    • Maximum Input Code Rate: 44.736Mbps
    • Format: Unframed Framing according to G.804 / G.752 (DS3) / G.703 E1/E3

TS over IP Output

  • 10/100base-T: RJ45
  • Maximum Output Code Rate: 70Mbps
  • UDP/RTP: Multicast or Unicast
  • Multicast Control Protocol: IGMPV2

Input Connectors

  • 1 IP input — RJ45 connector (Gigabit Ethernet, shared with output)
  • 1Ethernet management port — RJ45 connector
  • 1 ASI — BNC connectors
  • 1 RF Tuner
  • 1 Genlock reference input (B.B./Tri-s Frame Sync)

Output Connectors

  • 1 IP output — RJ45 connector (Gigabit Ethernet, shared with input)
  • 1 RS-232 printing port
  • 2 ASI — BNC connectors
  • 2 SDI — BNC connectors
  • 1 HDMI
  • 1 component video — Y Pb Pr set of RCA connectors
  • 1 composite video — BNC connector
  • 1 composite video — RCA connector
  • 2 DB-9 connectors for 2 digital AES/EBU & 2 analog XLR audio stereo pairs
  • 1 RF Tuner loop-out

Physical Specifications

Input voltage:
AC 90V~260V, 50/60Hz, 50W (max); DC -48V
Dimensions & Weight:
1RU (H) / 19 (W) x 10 (L) in / 483 (W) x 255 (L) mm
11 lbs / 5 Kg
Operating Conditions:
Temperature 0~45°C; Humidity 95%
Storage Temperature:
20~70°C

Download Datasheet

 
IRD-5502 Integrated Receiver/Decoder PDF Print E-mail

BE-IRD-5502 Integrated Receiver/Decoder

The BE-IRD-5502 is a versatile broadcast-class H.264/AVC (MPEG-4) HD/SD integrated receiver and decoder for broadcasters, cable operators, and telecoms. A highly flexible professional choice, the 5502’s ability to decode all video formats (HD or SD, MPEG-2 or MPEG-4), together with its wide choice of input options, makes it the perfect solution for customers migrating from MPEG-2 SD to MPEG-4 HD. A built-in Multiplexer/Filter allows users to create highly customized output transport streams. Two PCMCIA Common Interface card slots support a variety of Conditional Access systems, including Conax, Cryptoworks, Irdeto, Mediaguard, NDS, SECA, Viacross, and others. LAN control and monitoring can done using the unit’s built-in Monitor Center facility, or through standard SNMP-based network management systems.

 

Input Specifications

DVB-S/S2 QPSK / 8PSK Demodulation

(complies with DVB-S, MPEG-2, ETSI 300421 standards)

Input frequency range:
950~2150MHz
Input Level:
-25dBm~65dBm
Input Impedance:
75Ω, F type female connector
Symbol Rate:
2~45Mb/s (SCPC or MCPC)
Rolling Off Factor:
0.35 for QPSK; 0.35, 0.25, 0.2 for DVB-S2
Punctured Rates:
1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 8/10 for DVB-S QPSK 3/5, 2/3, 3/4, 5/6, 8/9, 9/10 for DVB-S2 8PSK
LNB Level:
0, 13V, 18V adjustable
Reed Solomon Error Correction:
204, 188, T = 8 & I = 12

DVB-C QAM Demodulation

(complies with DVB-C & MPEG-2 standards)

Tuner
Input Symbol Rate Range:
1~7Mbps (PAL), 1~6Mbps (NTSC)

Demodulation:
16/32/64/128/256QAM
Bandwidth:
6, 7, 8MHz
Input
Frequency Range:
48~860MHz
Digital Signal Input Level:
-15~15dBmV

Input Impedance:
75Ω, IEC Female (7/8MHz) or F Female (6MHz) Input

DVB-T COFDM Demodulation

(complies with DVB-T & MPEG-2 standards)

Tuner
Input Symbol Rate Range:
4.98~31.67Mbps (8MHz bandwidth)

Demodulation:
QPSK, 16 QAM, 64 QAM
Bandwidth:
6, 7, 8MHz
FFT Mode:
2K/8K
Guard Interval:
1/4, 1/8, 1/16, 1/32, off
FEC Code Rate:
1/2, 2/3, 3/4, 5/6, 7/8
Input
Frequency Range:
470-862MHz (UHF), 174-230MHz (VHF)
Digital Signal Input Level:
-20~-70dBmV

Input Impedence:
75Ω, IEC Female (7/8MHz) or F Female (6MHz) Input

DS3 Input & Loop-through Output

(compatible with Barco, Huawei, etc. protocols)

Impedence:
75Ω
Connector:
BNC
Maximum Input Code Rate:
44.736Mbps

Format:
Unframed Framing according to G.804 / G.752 (DS3) / G.703 E1/E3

TS over IP Output

10/100base-T:
RJ45
Maximum Output Code Rate:
70Mbps

UDP/RTP:
Multicast or Unicast
Multicast Control Protocol:
IGMPV2

Input Connectors

  • 1 IP input – RJ45 connector (shared with output)
  • 1Ethernet management port – RJ45 connector
  • 2 ASI – BNC connectors
  • 1 RF Tuner

Output Connectors

  • 1 IP output – RJ45 connector (shared with input)
  • 1 RS-232 printing port
  • 4 ASI -- BNC connectors
  • 2 SDI – BNC connectors
  • 1 HDMI
  • 1 component video – Y Pb Pr set of RCA connectors
  • 2 composite video – 1 RCA connector, 1 BNC connector
  • 2 L/R stereo pairs – RCA connectors
  • 2 DB-9 connectors for 2 digital AES/EBU and 2 analog XLR audio stereo pairs
  • 1 RF Tuner loop-out

Physical Specifications

Input voltage:
AC 90V~260V, 50/60Hz, 50W (max); DC -48V
Dimensions & Weight:
1RU (H) / 19 (W) x 10 (L) in / 483 (W) x 255 (L) mm 11 lbs / 5 Kg
Operating Conditions:
Temperature 0~45°C; Humidity < 95%
Storage Temperature:
20~70°C

Download Datasheet

 
«StartPrev1234NextEnd»

Page 1 of 4

Latest News

Telestream NASCAR Project Wins IBC2012 Innovation Awards

Nevada City and San Jose, California, September 10, 2012 - Telestream®, a leading provider of video transcoding and workflow solutions, and Quantum, a global expert in data protection and big data management, today announced that the NASCAR video capture and replay project incorporating technology from both companies won the prestigious IBC2012 Innovation Award in the Content Management category. Telestream developed the video capture and replay system for NASCAR’s high-speed sports officiating. The award recognized NASCAR and its project partners, including Quantum for its StorNext data management software and CineSys for its disk storage.


“It is an honor for the NASCAR project to be recognized by the IBC,” said Barbara DeHart, vice president of marketing at Telestream. “The new race control system would not have been possible without the collective efforts of NASCARProductions, along with the Telestream, Quantum and CineSys teams. Together, we were able to bring high-quality capture and replay into the race-day operations of one of the most exciting sports around.”

In the fast-paced world of NASCAR racing, where broadcasts reach more than 150 countries, video also plays a key role in controlling NASCAR races. The new race control system is based on Telestream’s Pipeline HD hardware encoder and a new, high-performance, multi-clip Pipeline Replay application.  The scalable, file-based system provides instant capture and synchronous display of 18 high definition (HD) camera feeds, enabling instant access, search, and analysis of an entire race event.

“The instant replay system that Telestream has provided NASCAR this season has enabled our officials to perform their jobs in an even more efficient and time-sensitive manner,” said Robin Pemberton, NASCAR Vice President of Competition. “Having instant access to that many camera angles featuring such high-quality video has been a terrific addition to our race weekends.”

The race control system utilizes high-speed StorNext File System software from Quantum to provide simultaneous access of video content, including the ability to rewind and read while continuing to write from 18 HD cameras. CineSys provided on-site infrastructure, architecture, installation, and technical assistance.

”We are pleased to have been selected by Telestream to participate in this important project, and it is especially gratifying to be recognized in this prestigious award. StorNext’s robust file sharing software is fine-tuned to address the high-performance streaming needs that accompany higher resolution video. Because of our collaboration, these combined technologies are greatly improving the accuracy of race monitoring and enhancing the experience for millions of NASCAR fans,” said Janae Stow Lee, senior vice president, File System and Archive Product Group at Quantum.

The award was presented at the IBC2012 Awards Ceremony on Sunday evening, September 9 at the RAI in Amsterdam. IBC is the premier annual event for professionals engaged in the creation, management and delivery of entertainment and news content worldwide. The Innovation Awards recognize collaboration and those who push the boundaries. Telestream is exhibiting at IBC in stand 7.D16, and Quantum is exhibiting in stand 7.G30.

Read More

EVO4 Video ActiveRaid